Freezer Paper Tutorial

This is my first video tutorial!! I really hope you guys like it. 

 

xoChristie

Magic Wand Tutorial

First and foremost, I'd like to apologize for the terrible quality of pictures. The only camera I had available was my phone, which has an awful blue-ish tinted flash. Again, I'm sorry and I hope it's not too unbearable!

I made these with the kids in my Harry Potter Club and they really loved it! It kept them busy and I liked that I did it in the early weeks because it gave them a chance to talk and get to know each other while they were gluing and doing the papier mache.

I did not come up with the idea for this on my own. I looked up a bunch of tutorials and I modified each of them and combined them in my own way. Unfortunately, I don't remember which ones I used but if I find them, I will put a link in this post to the blog sites.

Here are the materials you will need.

BBQ Skewers
Pipe Cleaners (aka Unicorn Hair, Dragon Heartstring, and Phoenix Feather etc)
Glitter (aka Magic Dust)
Newspaper (one full sheet and a good amount of strips
Tape
Papier Mache mixture (I believe I used 1 part water : 2 parts glue)

Next you want to tape two or three skewers together with a Magical Core!

Roll it up in the FOLDED sheet of newspaper. (You know how a FULL sheet is technically 4 sections? I just used HALF (two sections) folded into one section...if that makes sense.

Don't forget to add some Magic Dust and recite an incantation!

Fold the ends of the newspaper over until the crease is just about at the ends of the skewers. We don't want any flimsy ends to our wands!

Now we begin the papier mache. Just dip and wrap! Feel free to let the strips of paper soak while you're working on your wand.

I wrapped the strips all in the same direction so when you smooth it out, it doesn't smooth in some parts and wrinkle in others. Remember, from here on out, it's totally up to the Wand Maker! If your little witch or wizard is not following this exactly, please don't try to micromanage. Just let the tyke be and see what comes of it. Certainly, however, provide help when it's requested!

See how the left side is thicker than the right? The left is where my handle is going to be. (Note, I did let it dry over the bowl in between coats. I believe it's easier to do a little at a time so it has time to dry...then the wet stuff is easier to work with when it's not a huge sloppy, gloopy mess.)

Just keep working it until...

BOOM! Ollivander status.

Now for the bad news. I don't know where the picture of my final product is! I painted mine all brown (dark for the handle, light for the rest), added some silver glitter accents, and dipped it for a silver glitter tip (to look like Lumos!)

For the good news. Here is a picture of some of my kids' wands! They came out great!! My favorite thing, though, is that no child's wand is the same or even remotely similar to another's. Make sure you have a variety of paint and other decorating supplies you can think of so the Wand-Maker-in-Training can exercise full creativity! Aslo, don't forget that NO TWO WANDS ARE THE SAME!

These are the FAB wands my kids at the club made! I love how distinctive they all are!

This Bad Boy is mine! 

I hope you liked this tutorial and I HOPE you will make some wands with your fellow Potterheads.

Thanks for reading, and don't forget to follow me on Pinterest!

xo Christie

Scratch Ticket Bouquet

Hello my friends! Today I'm going to show you how to make a Scratch Ticket Bouquet! My mom looooves her scratch tickets and I end up getting her some for almost every holiday or occasion. I wanted to spice it up a little bit this year and made this:

My inspiration from this project came from this post of a Nip Bouquet (I also have a picture of one I made that I will put up at the end of this tutorial)

Here are your materials: 

- 2 bags of craft sand

- Small tin bucket (found mine at Michael's for about $3

- BBQ Skewers

- Clothes pins from the dollar store

- Acrylic paint (works best on the skewers and clothes pins)

- Glue gun

- Paint brush

- Ribbon

- Scissors

Fill the tin with as much sand as you see fit. I wanted to make sure the "stems" of the "flowers" would stay up so I put about a bag and a half

Not Shown/Optional: Break the skewers...this depends on the size of the bucket and how many scratch tickets you are putting in the bouquet. Just use your judgement. You could break them so they stagger in length, but I just bought different sizes of tickets.

Anyway, whether you broke the skewers or not, you hot glue the non-broken end to the side of the clothes pin that you would pinch to open or close it.

After you've glued them, recruit your boyfriend who is SUCH a good sport ;-) and have him paint the stems. Nice job, Tom!

Now you get to put them in!

I started with the biggest ones and put them toward the back of the bucket

Voila! 

Don't forget the finishing touch!

There you have it. Your own little Scratch Ticket Bouquet! Definitely better than flowers ;-)

Don't worry, I didn't forget! As promised, here are a couple of pictures from my sister's 21st Birthday Nip Bouquet I made for her this week!

If you decide to make one of these instead of the Scratch Tickets, MAKE SURE you use extra skewers! I DID stagger the length this time and I used 3 on each nip. Don't be stingy or your nips will fall over and they will not look good.

Uhh, this apple pie liquor is delicious, just saying.

Did you notice I just re-used the tin and ribbon from my mom's? Reduce, Reuse, Recycle, people!!!

That's it for today! Thanks so much for stopping by and reading. I have a very special post coming within the next few days...and guess what? It is my long-awaited first post that has everything to do with Harry Potter! Very exciting stuff, folks, so stay tuned!!

xo Christie

Make Up Magnet Board: Tutorial with Pictures!

Hello Friends! I haven't posted in almost a year :( But I'm really going to try to post more of my crafting adventures now that the holidays are over.

This year for Christmas, I made my sister, Courtney, a magnetic make up board. I couldn't post it until now because I didn't want the surprise to be ruined! Now that I'm sitting here with my feet soaking in my new foot massager, I feel it's a perfect time to write this tutorial. This one's for you, Jo!

First, here are the materials you'll need. A frame, fabric, a sheet of magnetic sheet metal (I got mine for $5 at Home Depot), some spray adhesive (make sure it works on metal!),  and magnets. Not pictured are scissors, an iron (optional), and your make up, of course!

I noticed my fabric had creases EVERY WHERE when I started, so I went back to my craft closet and dug out my iron. I'm really glad I didn't skip this step, wait till you see how smooth it turned out! ;) 

Next comes the glue! Just follow the directions on whatever glue you get. I highly recommend the spray adhesive because it doesn't get all gloopy and thick. It sprays a nice, even coat which is really important if you want any magnets to stick right. What I did was lay the fabric over the sheet metal and then fold it back (I hope you can see from the picture) so all I had to do was lift the fabric back up and over onto the sprayed metal.

Working quickly and still trying to hold my phone to take pictures (;-P) I smoothed out any wrinkles in the fabric over the metal. This was pretty easy and I attribute that to my method of "Up and Over" before gluing. 

See?? All glued :)

Next, I trimmed off the excess fabric. You should have seen it before...I had a whole YARD for this 12x18 piece of metal. Silly. As you can tell, the edges don't have to be pretty. No one will see them.

Fold and glue the sides over...

And again...

TA-DA! Pretty, clean, smooth Metal-Wrapped-in-Fabric.

If you're like me and get cheap frames to save a little cash, you might want to touch up yours. I left the glass on because, guess what, Genius? We're not using it! After you TAKE THE GLASS OUT, put your Metal-Wrapped-in-Fabric in the frame, and put the backing on, you end up with....

A BEAUTIFUL magnetic make-up (or whatever you want it to be) board! Yippee! It was super easy and probably only took a half an hour from start to finish.

I even went a little fancy and added my own picture hanging hardware. I'd always been really intimidated by it but trust me, it's SO easy! and it's easier to hang with a wire than with those stupid metal teeth things or the puny, dinky triangles that always smoosh back into the frame...ahhh yes. Definitely take the extra time and $5 to put the hardware on. If you're not sure which one to get, just ask the person in the frame shop at your local craft store.

Well, I hope you enjoyed my tutorial! I definitely had fun making this and Courtney loved it! Please feel free to add any comments or questions about this. I will do my best to reply ASAP! I hope you and yours have a very Happy New Year!

xo Christie